Most painters charge around $200 a door to paint a stained door white, jamb and casing included. That’s the middle of 55 answers to one question posted in a painting contractor group: what would you charge for 12 stained flush doors with jambs and casing, painted white?

The answers ran from $45 a door to $583. Same 12 doors, same photo.

The low answers mostly priced it like a repaint. The experienced painters priced a stain conversion, and the most-liked answers came in well above the median. This post shows why, and how to price your next set of doors from hours.

What painters charge per door

The median is $200 per opening (door, jamb and casing), and half the answers fall between $131 and $250.

Scatter chart of prices to paint 12 stained doors white from 55 painters, per opening, median $200, with a real FieldVue quote at $255

The two most-liked answers were well above that median. One said $350 per opening: oil primer, prep and two finish coats. Another said $200 a door plus $100 a jamb, $300 an opening, and listed the work behind it: sanding, two spray rigs, caulking the jambs, dusting, cleanup and fuel.

The jamb and casing came up again and again. They’re more work than the slab: inside corners, caulk, nail holes, wall touch-up, both sides. Several painters price them as a separate line for that reason.

Prices are per opening. Totals given for all 12 were divided by 12.

Stain to white is not a repaint

The biggest split in the thread was between painters who priced a repaint and painters who priced a stain conversion. Stained wood bleeds tannin through latex paint. It needs an oil or shellac primer, and several painters said the $150 answers were using the wrong one. One noted an acrylic primer needs two coats with a day between them to block the bleed; oil does it in one.

That primer coat is where the hours go. Here is the same job, 12 doors with jambs and casing, quoted in FieldVue at prime plus two coats of Sherwin-Williams Duration Home in semi-gloss, $27.50 an hour, 50% margin:

Line Labor hours Labor Paint
Interior doors (12, both faces) 21.3 $586.67 $226.15
Door trim: jamb and casing (12) 19.2 $528.00 $53.85
Sundries and cleanup $132.50
Cost 40.5 $1,527.17

At a 50% margin that’s $3,055, or $255 per opening: above the $200 median, at the top of the middle half, and still below the most-liked answers in the thread ($300 to $350). The hours line up too: 40.5 for the job, about 3.4 per opening, against the one painter who estimated by time at 30 to 40 hours.

Notice the trim. The jamb and casing are nearly half the hours, which is why the painters who split them out were right to. And paint is only $280 of a $3,055 job: 4 gallons of finish and 2 of primer. Use a true stain blocker on stained wood; a shellac primer costs more per gallon, but on this job that adds only about $120 at cost, a small price against a callback.

When to tell the customer to replace instead

A surprising number of painters said the honest answer for plain flush doors is new doors. Painters in the thread put new preprimed flush doors at $75 to $125 each, with installation around $100 a door. One Dallas painter quoted a new door installed for $300 or less.

So a stain conversion at $250 to $300 an opening is competing with replacement on a cheap hollow-core door. On a solid or paneled door it isn’t close, and painting wins.

That makes replacement a good line on the quote, not a lost job. Offer both: paint the existing doors with a proper stain-blocking primer, or replace them and paint the new ones. The customer picks, and you’ve answered the question they were going to ask anyway. Even new doors still need their jambs and casing painted.

How to price doors, step by step

  1. Check the finish. Painted, stained or clear-coated decides the primer, and the primer decides the hours. Stained or clear-coated wood needs an oil or shellac stain blocker.
  2. Count openings, not doors. Each opening is the door, both faces, plus its jamb and casing.
  3. Turn openings into hours. At prime plus two, plan on about 3.4 hours an opening; a straight repaint of painted doors at two coats runs about 2.1.
  4. Price the primer at what it really costs. Shellac and oil primers run well above a general-purpose primer. Use the real number.
  5. Add the extras you see. Sticking doors, dents, heavy wear and hardware all add time; a few painters adjust the price for raised panels and glass.
  6. Price labor at what it costs you, add paint, sundries and cleanup, and divide by one minus your margin.
  7. Offer replacement on cheap flush doors. Put both options on the quote.

Doors are usually one line of a bigger job. See what 100 painters charged to paint the same 12×12 room, or price the whole interior with the free interior painting estimate template. Painting kitchen cabinets too? Those price by the piece: see how 81 painters price cabinet painting.