Most painters price cabinets at around $125 a door. That is the middle of 81 answers I pulled from three painting contractor threads, all asking some version of the same question: what do you charge to paint kitchen cabinets?

The answers ran from $45 a door to $300. One thread priced a single job, 17 doors and 7 drawers, and got totals from $1,000 to $10,000. Same kitchen.

The price is not the useful part, though. The useful part is the three experienced painters who said how many hours a kitchen takes them. That is what turns a number someone else charges into a number you can charge. This post covers both, and ends with a worked example you can copy.

What painters charge for cabinets

The median is $125 a door. Half of the painters who gave a per-door price charge between $100 and $175.

Scatter chart of cabinet painting prices per door from 26 painters, median $125, with a real FieldVue quote at $119 per piece for doors and drawers only and $158 with frames included

Drawer fronts run about 64 percent of the door price where painters gave both. When one thread asked 55 painters to price the same job, 17 doors and 7 drawers, the median total was $3,075, or $128 a piece. Two different ways of asking, the same answer.

At $27.50 an hour, FieldVue’s default rates price that job’s doors and drawers at $2,815, a little under the painters’ median. With the boxes added, the all-in example kitchen below comes to $157 a piece.

Why nobody agrees on a cabinet price

A “door” is not one unit of work. Five things change what’s behind it, and almost nobody stated all five.

  • Process. Spraying doors in a shop and rolling boxes on site is a different job from brushing everything in the kitchen. The fastest painter in these threads budgets about a third of the hours of the slowest for the same kitchen.
  • Coating. Answers that named a 2K or catalyzed product priced higher: $175 to $225 an opening, against $100 to $125 for rolled waterborne enamel. Several painters warned that cheaper enamels yellow or get gummy over a stove.
  • What counts. Some prices include the boxes, some add $35 per box, and some charge for end panels, glass fronts or shelves on top. “$125 a door” can mean very different totals.
  • Prep. Grease, open grain, old failing finish and dents all add sanding and filling. One painter bills grain filling as time and materials; another adds a prep fee of at least $250.
  • Market. A painter west of Nashville said $150 a door would lose almost every bid. A shop in Sacramento charges $180. Both are right where they are.

That’s why the median is a starting point, not a price. The way to your price runs through hours.

The hours behind a kitchen

A typical kitchen of 30 doors and 13 drawers takes experienced painters somewhere between 44 and 146 labor hours. Three painters in these threads gave real hours, and FieldVue’s default rates land in the middle of them.

Who Process Hours for 30 doors + 13 drawers
A well-known cabinet refinisher Prep, prime, 2 sprayed coats; experienced crew 44 (58 “to be profitable”)
A group moderator who runs a cabinet shop Sprayed 2K; prices kitchens in 20-hour blocks About 98 (80 hours for 35 openings, scaled)
FieldVue default rates Prime + 2, including 11 boxes 106
A painter who sands between every coat Degrease, sand, 2 primer coats, 2 top coats 103 to 146, doors and drawers only

The hours are total labor hours, whatever the crew size. The refinisher made a point of that: two painters don’t halve the job, they split it.

Notice what the prices have in common. The refinisher sells this kitchen at about $150 a piece, which works out to roughly $110 of revenue per hour. The shop states $90 an hour outright. Cabinet hours sell for more than wall hours, because the skill, the setup and the risk are higher. If you price cabinets at your wall rate, you are giving that away.

The boxes: the line most painters forget

On the 17-door, 7-drawer job, the painters’ median was $3,075. At $27.50 an hour, FieldVue’s default rates price the doors and drawer fronts alone at $2,815, a little under it. Add six cabinet boxes and FieldVue comes to $3,800.

That $985 is the boxes. Most per-door prices fold them in quietly, and a box is real work: the face frame, the visible sides, the toe kick, all cut in place in a kitchen someone is living in. FieldVue counts a box as a frame (a unit holding two to four doors and some drawers, side panels included) at about 1.7 hours for two coats and 2.5 hours for prime + 2.

You don’t have to charge for boxes separately. But if your per-door price was set without them in mind, the boxes are coming out of your margin. The painters who list them, at $35 a box or as a “frame fee,” at least know what that line costs them.

Extras and minimums painters charge for

The painters who price cabinets well list the extras instead of absorbing them. These came up more than once:

Item What painters charged
Drawer front About 64% of the door price, where both were given
Glass-front door $150, against $100 for a solid door
Travel more than 20 minutes away $15 to $25 more per door and drawer
Job minimum $2,500 to $5,250; one painter won’t touch a single vanity under $3,500

A few painters also bill end panels or the island back separately. Treat those as part of the frame, and leave shelves and interiors out unless the customer asks for them, priced as an add-on.

The minimum matters most. A small vanity carries almost the same setup, masking, spray cleanup and drying time as a kitchen. Without a floor, small cabinet jobs are where the hours quietly disappear.

A real cabinet quote, line by line

Here is a kitchen priced in FieldVue at its default rates: 29 doors, 10 drawer fronts and 9 frames, prime plus two coats of Sherwin-Williams Emerald Urethane in satin, $27.50 an hour, 50% margin. It comes to $6,148, or about $158 per door and drawer front with the frames included. That sits inside the middle half of what painters charge. Leave the frames out, the way most per-door prices do, and the doors and drawer fronts alone come to about $119 a piece, just under the $125 median.

FieldVue ScopeVue screen for a kitchen cabinet quote: 9 cabinet frames, 29 doors and 10 drawer fronts, each prime plus two coats of Sherwin-Williams Emerald Urethane in satin, $6,148.30 running total

Line Labor hours Labor Paint
Cabinet doors (29) 58.0 $1,595.00 $69.59
Cabinet frames (9) 24.0 $660.00 $24.69
Drawer fronts (10) 14.4 $396.04 $13.72
Sundries and cleanup $315.11
Cost 96.4 $3,074.15

Three things stand out. The doors are more than half the hours. The frames are a quarter of them, which is the line a per-door guess quietly gives away. And paint is under $110: about a gallon of topcoat for the whole kitchen, because cabinet coats go on thin. On cabinets you are selling hours, not paint.

FieldVue materials screen for the cabinet quote: one gallon of Emerald Urethane and one gallon of primer, $108 total, with 0.8 gallon of topcoat and 0.4 gallon of primer needed

The price is the cost divided by one minus the margin: $3,074.15 ÷ 0.50 = $6,148.30.

FieldVue cost breakdown for the cabinet quote: frames $684.69, doors $1,664.59, drawer fronts $409.76, sundries and cleanup $315.11, cost basis $3,074.15, 50% margin, $6,148.30 total

The customer sees the scope, the named product and color, and the price, never the hours or the margin.

Customer-facing FieldVue estimate for the kitchen cabinets: doors $3,708.36, frames $1,526.28, drawers $913.66, $6,148.30 total

How to price a cabinet job, step by step

Price the hours first, then check the answer against the market. Here is a typical kitchen run through the free template at its defaults: 30 doors, 13 drawer fronts and 11 frames (the cabinet units, side panels included), prime plus two coats.

  1. Count the pieces. Doors, drawer fronts and frames. A frame is one cabinet unit holding two to four doors and some drawers; its side panels and the island back come with it.
  2. Turn pieces into hours. At prime + 2, FieldVue’s rates are 2 hours a door, about 1.4 per drawer front and 2.5 per frame. This kitchen comes to 106 labor hours.
  3. Adjust for the cabinets. Raise the hours for heavy grease, open grain, a failing old finish or a tight, occupied kitchen.
  4. Price the labor at what it costs you. 106 hours at a $27.50 loaded rate is $2,917.
  5. Add materials, sundries and cleanup. About a gallon of cabinet enamel and half a gallon of bonding primer ($107.50), sundries ($159) and cleanup ($182). Total cost: $3,366.
  6. Price from your margin. $3,366 ÷ (1 − 0.50) = $6,732, rounded to $6,735, about $157 per door and drawer front with the frames included.
  7. Check it. $157 a piece sits inside the middle half ($100 to $173), toward the top, which is where an all-in price with frames should sit. If your market won’t carry it, the fix is faster hours, not a lower margin.
  8. Set a minimum. A single vanity run through the same math comes in far lower than its real setup cost. Put a floor under it.

Painting the interior doors too? See what 55 painters charged to paint the same 12 doors, or price the rest of the house with the 7-step production-rate method.